Question: Can I Use 1333 And 1600 Ram Together?

Can I put 1600mhz ram in a 1066MHz slot?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used .

both RAMs will run at same speed.

If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course..

Is 1600 RAM speed good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Can I use 2 4gb and 1 8gb RAM?

Simple answer is. If you have only 2 Dimm or ram slots in your motherboard then one 8gb ram would be good. If you have more than 2 then 2*8gb ram would be good.

Can I add 8gb RAM to 4gb laptop?

In technical aspect, a 8GB RAM stick can be added to a computer 4GB RAM as long as both of 8GB and 4GB have the same speed front side bus speed. For better performance, the both of RAM sticks should have also same size not only same speed. It means that, the second RAM stick should be 4GB instead of 8GB stick.

Is there a big difference between 1333 and 1600 Ram?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Can you use faster RAM than specified?

Rick’s answer: Eric, the short answer to your questions is yes. Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. … 2 – Make sure you don’t purchase individual RAM sticks that are larger than your motherboard can accept.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Which is faster 1333MHz or 1600MHz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Is 2400 Mhz RAM good?

For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. … What’s important to remember here is that system RAM is not handling command processes like the CPU does, so while a higher CPU frequency will almost always mean better PC performance, the same may not be the case for high frequency RAM.

Can I use all 4 RAM slots?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

Do all 4 sticks of RAM have to be the same?

You can even mix sticks although not recommended and a higher chance for the ram not playing nice together. Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Is it OK to mix and match RAM?

Can you mix RAM size? Yes. But it might not be best for performance. It is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Can 2 different RAM work together?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.

Can I combine 4gb and 8gb RAM?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … Sometimes you will have to swap the RAM slots since the detection has bugs.

Can I use 1066 and 1333 Ram together?

No, the correct answer is that it does not matter. You can mix RAM of both speeds (1066/1333). The system will automatically use the slower speed, but there is no risk of system crashes. And no, 1333MHz RAM will not be recognized in a 2009 iMac, but 1066MHz in the 2010 is just fine.